Lantronix UDS1100 User's Guide Page 11
- Page / 84
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
2: Introduction
UDS1100 User Guide 11
Protocol Support
The UDS uses the Internet Protocol (IP) for network communications and the
Transmission Control Protocol (TCP) to assure that no data is lost or duplicated and
that everything sent to the connection arrives correctly at the target.
Supported protocols include:
ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, and SNMP for
network communications.
TCP, UDP, and Telnet for connections to the serial port.
TFTP for firmware updates.
IP for addressing, routing, and data block handling over the network.
User Datagram Protocol (UDP) for typical datagram applications in which
devices interact with other devices without a point-to-point connection.
Additional Features
Modem Emulation: In modem emulation mode, the UDS can replace dial-up
modems. The unit accepts modem AT commands on the serial port and then
establishes a network connection to the end device. This arrangement leverages
network connections and bandwidth to eliminate dedicated modems and phone lines.
Built-in Web Server: The UDS includes a built-in web server for configuring the unit
and displaying operating and troubleshooting information on the attached links to
online support.
Configuration Methods
After installation, the UDS requires configuration. For the unit to operate correctly on
a network, it must have a unique IP address on the network. There are three basic
methods for logging into the UDS and assigning IP addresses and other configurable
settings:
DeviceInstaller: Configure the IP address and other network settings on the UDS
using a Graphical User Interface (GUI) on a PC attached to a network.
(See Assigning the IP Address: DeviceInstaller on page 17.)
Web-Manager: Through a web browser, configure the UDS settings using the
Lantronix Web-Manager. (See 4: Configuration Using Web-Manager.)
Serial and Telnet Ports: Use Setup Mode, a command line interface. There are two
approaches to accessing Setup Mode: making a Telnet connection to the network
port (9999) or connecting a terminal (or a PC running a terminal emulation program)
to the unit’s serial port. (See 5: Configuration via Telnet or Serial Port (Setup Mode.)
- UDS1100 1
- User Guide 1
- Copyright & Trademark 2
- Contacts 2
- Revisions 2
- Contents 3
- Figures 6
- Purpose and Audience 7
- Chapter Summary 7
- Additional Documentation 8
- Applications 9
- Application Examples 9
- Protocol Support 11
- Additional Features 11
- Configuration Methods 11
- Product Information Label 12
- Package Contents 13
- Installing the UDS 14
- Required Information 16
- Installing DeviceInstaller 17
- Assigning an IP Address 17
- 3: Getting Started 19
- UDS1100 User Guide 19 19
- Next Step 20
- Network Configuration 23
- Network Mode 24
- Ethernet Configuration 25
- Server Configuration 26
- Host List Configuration 27
- Channel 1 Configuration 28
- UDS1100 User Guide 29 29
- Channel 1 29
- Port Settings 29
- UDS1100 User Guide 30 30
- Pack Control 30
- Connection Settings - TCP 31
- Connection Settings - UDP 34
- Apply Settings 35
- Apply Factory Defaults 35
- Accessing Setup Mode 36
- Exiting Setup Mode 37
- IP Address 38
- Set Gateway IP Address 38
- DHCP Name 39
- Channel 1 (Option 1) 41
- Baudrate 41
- I/F (Interface) Mode 42
- Port Number 43
- Connect Mode 43
- UDS1100 User Guide 44 44
- UDS1100 User Guide 45 45
- Send Characters 53
- Telnet Terminal Type 54
- Channel (Port) Password 54
- Expert Settings (Option 5) 55
- Security Settings (Option 6) 57
- Default Settings (Option 7) 59
- UDS1100 User Guide 60 60
- Obtaining Firmware 61
- Reloading Firmware 61
- Figure 9-1. TFTP Window 62
- Monitor Mode Commands 64
- Power LED (green) 66
- Diagnostic (red) 66
- Status (green) 66
- Problems and Error Messages 67
- UDS1100 User Guide 68 68
- Technical Support 69
- Serial Port 70
- Serial Connector Pinouts 70
- Modem Cable 71
- Network Port 72
- Ethernet Connector Pinouts 73
- Power Plug 73
- Category Description 74
- AutoIP 76
- ARP and Telnet 77
- Conversion Table 78
- Scientific Calculator 79
- Manufacturer’s Contact 82
- UDS1100 User Guide 84 84
Related products and manuals for Serial servers Lantronix UDS1100
Serial servers Lantronix EDS8PS User's Guide
(163 pages)
(163 pages)
Serial servers Lantronix EDS1100 User's Guide
(157 pages)
(157 pages)
Serial servers Lantronix MSS4 User's Guide
(81 pages)
(81 pages)
Serial servers Lantronix EDS4100 User's Guide
(163 pages)
(163 pages)
© 2020, manymanuals.com. All rights reserved. | 1.222 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals