Lantronix SecureBox SDS1101 User's Guide download pdf (Page 61)

8: Setup Mode: Advanced Settings

SDS1101/2101 User Guide 61

Figure 8-2. Security Settings

Disable SNMP (N) ?

SNMP Community Name (public):

Disable Telnet Setup (N) ?

Disable TFTP Firmware Update (N) ?

Disable Port 77FEh (N) ?

Disable Web Server (N) ?

Disable Web Setup (N) ?

Disable ECHO ports (Y) ?

Enable Encryption (N) ?

Enable Enhanced Password (N) ?

Disable SNMP

This setting allows you to disable the SNMP protocol on the unit for security reasons.

The default setting is N (No).

Disable SNMP (N) ?

SNMP Community Name

The SNMP Community Name is a required field for NMS to read or write to a device.

Enter a string of 1 to 13 characters. The default setting is public.

SNMP Community Name (public):

The default entry is public. The current value is displayed in parentheses.

Disable Telnet Setup

Note: If you choose to disable this option, keep in mind that disabling both

Telnet Setup and Port 77FE will prevent users from accessing the setup

menu from the network.

This setting defaults to the N (No) option. The Y (Yes) option disables access to

Setup Mode by Telnet (port 9999). It only allows access locally using the web pages

and the serial port of the unit.

Disable Telnet Setup (N) ?

Disable TFTP Firmware Update

This setting defaults to the N (No) option. The Y (Yes) option disables the use of

TFTP to perform network firmware upgrades. With this option, you can download

firmware upgrades over the serial port using DeviceInstaller’s Recover Firmware

procedure. (See 9: Firmware Upgrades.)

Disable TFTP Firmware Update (N) :

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 95 96

No comments

Lantronix SecureBox SDS1101 User's Guide Page 61