Lantronix SecureBox SDS1101 User's Guide download pdf (Page 60)

8: Setup Mode: Advanced Settings

SDS1101/2101 User Guide 60

sequences (only during the bootup sequence). The default for Disable Monitor Mode

at bootup is N (No). (See 10: Monitor Mode.)

Monitor Mode @ bootup : enabled

HTTP Port Number

This option allows the configuration of the web server port number. The valid range is

1-65535. The default HTTP port number is 80.

HTTP Port Number : (80) ? _

MTU Size

The Maximum Transmission Unit (MTU) is the largest physical packet size a network

can transmit for TCP and UDP. Enter between 512 and 1400 bytes. The default

setting is 1400 bytes.

MTU Size: (1400) ? _

Enable alternate MAC

If necessary, enable the alternate MAC address (if specified in the OEM setup

record). The default setting is N (No).

Enable alternate MAC (N) ? _

Ethernet connection type

The SDS allows for the Ethernet speed and duplex to be manually configured. Enter

0 for auto-negotiation (default). To select the speed and duplex, enter one of the

following: 2 (10Mbit/half duplex), 3 (10Mbit/full duplex), 4 (100Mbit/half duplex), or 5

(100Mbit/full duplex).

Ethernet connection type: (0) ? _

Security Settings (Option 6)

You can change security settings by means of Telnet or serial connections only, not

on the Web-Manager. We recommend that you set security over the dedicated

network or over the serial setup to prevent eavesdropping.

Caution: Disabling both Telnet Setup and Port 77FE will prevent users

from accessing the setup menu from the network. Disabling Port 77FE

also disables the Web from configuring the device.

Select 6 to configure security settings.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 95 96

No comments

Lantronix SecureBox SDS1101 User's Guide Page 60