Lantronix ETS16PR User Manual download pdf (Page 53)

ETS Installation Guide

Ethernet Connector

Figure C-1. RJ45 Ethernet Connector

RJ45 Serial Connectors

ETS servers are RS-423 compliant, and are thus limited by the equipment at the

remote end of the serial line. If the port is connected to an RS-232 device, it is

subject to RS-232 limits: 15m (50 ft.) in length at 9600 baud, and to 2m (6 ft.) at

115.2K baud, although longer lengths will generally work.

Figure C-2. RJ45 Serial Connector

RJ45 to DB25

If you are connecting an RJ45 port to a DTE device (such as a terminal) that has a

DB25 connector, you will need to use an RJ45-DTE DB25 adapter. To connect an

RJ45 port to a DB25 connector on a DCE device, you will need an RJ45-DCE DB25

adapter. The pinout information for both connections is shown in Figure C-3.

Note: For a full list of adapters, see

http://pscprod.lantronix.com/paal/paalInterfaceLookup.jsp

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 67 68

No comments

Lantronix ETS16PR User Manual Page 53