Lantronix XPort User Manual download pdf (Page 37)

4: Using Setup Mode for Configuration

XPort™ User Guide 37

E-mail Settings

Note: You can change these settings via Telnet or serial connections only,

not on the Web-Manager. To configure e-mail settings via DeviceInstaller,

see E-mail Notification in the DeviceInstaller User Guide on the CD.

The unit can send an e-mail to multiple recipients when a specific trigger event

occurs. There are three separate triggers, based on any combination of the

configurable pins (PIO) when selected as user I/O functions. You can also use a two-

byte serial string to initiate a trigger.

Figure 4-8. E-mail Settings

E-mail Setup

E-mail setup requires you to set up the e-mail server location as follows:

Mail server

The IP address in decimal-dot notation.

Unit

The user name used by the XPort to send e-mail messages.

Domain

The domain name of your e-mail server.

Recipient 1

Full e-mail address of the recipient.

Recipient 2

Full e-mail address of the second recipient.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 56 57

No comments

Lantronix XPort User Manual Page 37