Lantronix XPort User Manual download pdf (Page 33)

4: Using Setup Mode for Configuration

XPort™ User Guide 33

 The character string ATH is received, terminated with a carriage return. The

unit responds affirmatively according to the selected echo/response mode

and drops the network connection. The serial interface reverts to accepting

command strings.

If this sequence is not followed, the unit remains in data transfer mode.

Table 4-12. Modem Mode Commands

Modem Mode

Command

Function

ATDTx.x.x.x,pppp or

ATDTx.x.x.x/pppp

Makes a connection to an IP address (x.x.x.x) and a remote port

number (pppp).

ATDTx.x.x.x

Makes a connection to an IP address (x.x.x.x) and the remote port

number defined within the unit.

ATD0.0.0.0

Forces the unit into Monitor Mode if a remote IP address and port

number are defined within the unit.

ATD

Forces the unit into Monitor Mode if a remote IP address and port

number are not defined within the unit.

ATDx.x.x.x

Makes a connection to an IP address (x.x.x.x) and the remote port

number defined within the unit.

ATH Hangs up the connection (Entered as +++ATH ).

ATS0=n

Enables or disables connections from the network going to the serial

port.

n=0 disables the ability to make a connection from the network to the

serial port.

n=1-9 enables the ability to make a connection from the network to

the serial port.

n>1-9 is invalid.

ATEn

Enables or disables character echo and responses.

n=0 disables character echo and responses.

n=1 enables character echo and responses.

ATVn

Enables 1-character response or full verbose.

n=0 enables 1-character response.

n=1 enables full verbose.

Note: The unit recognizes these AT commands as single commands such as

ATE0 or ATV1; it does not recognize compound commands such as ATE0V.

Remote IP Address

This is the destination IP address used with an outgoing connection.

Remote Port

You must set the remote TCP port number for the unit to make outgoing connections.

This parameter defines the port number on the target host to which a connection is

attempted.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 56 57

Comments to this Manuals

No comments

Lantronix XPort User Manual Page 33

Comments to this Manuals

Related products and manuals for Networking Lantronix XPort