Lantronix WiSpan User Manual download pdf (Page 23)

6: Web-Manager Configuration

WiSpan User Guide 23

Network Configuration

Select Network from the main menu to display the unit's network values. The following

sections describe the configurable network parameters.

Note: The automatically assigned IP address and related settings do not display.

Figure 6-2. Network Settings

Automatic IP Address Configuration

To assign an IP address and its network configuration automatically:

1. Click Network from the main menu.

2. Enter the following:

IP Configuration

AutoIP The WiSpan generates an IP in the 169.254.x.x address

range with a Class B subnet.

To enable this feature: Select the Enable checkbox and

continue with Ethernet Configuration.

To disable this feature: select the Disable checkbox

(default) and continue entering information. Then continue

with Ethernet Configuration.

IP Address If you did not enable AutoIP, enter the static IP address in

standard decimal-dot notation. The IP address must be set to

a unique value in the network.

Subnet Mask A subnet mask defines the number of bits taken from the IP

address that are assigned for the host part.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

No comments

Lantronix WiSpan User Manual Page 23