Lantronix IBIO21002-01 Datasheet download pdf

True Autonomous Control with EventTrak

IntelliBox proactively monitors and controls remote digital I/O, dry

contact (relay) and RS232/422/485-based equipment. With built-in

EventTrak technology, IntelliBox can be set to query an attached

device at timed intervals then, depending on the results, take pre-

specified action(s). In addition to monitoring a serial line the IntelliBox

can also monitor digital I/O. Fluid-level monitoring is a simple example –

if IntelliBox notices a digital float sensor drop to a ‘low level,’

it can trigger a relay to start the fluid pump. When the level is

restored the relay is triggered to stop the pump. IntelliBox sends

an email to the user notifying them of the situation and the

actions taken. Instead of reacting to an event or problem, users

are proactively notified that an event occurred and the appropriate

response automatically took place. This also enables users to control

networked equipment directly through the serial or I/O port rather

than depending on a PLC or SCADA server. In some instances, several

events should occur before action is taken. EventTrak allows “Chain

Definitions” (series of events/ actions) to be defined. They can be

saved, stored and transferred from one IntelliBox to another, providing

a great deal of flexibility for large-scale deployment.

IntelliBox is ideal for alarms, fluid pumps, motor drives, lights, fans,

phone systems, access/control/alarm panels, HVAC equipment, PLC’s,

projectors, security cameras, proximity readers, card readers, etc.

Automated Reporting

IntelliBox consolidates the task of monitoring/reporting on multiple

pieces of equipment. Rather than query and review the output of each

device separately, users can configure the IntelliBox to query attached

equipment at configurable intervals and gather the returned data.

Incoming data can be sent via email or RSS feed, allowing hundreds

of devices to be monitored from one RSS-enabled web page.

Incoming data can be scanned for specific information. When it is

detected, IntelliBox can send an email flagged as “Important” along

with the data and take corrective action if needed.

Enterprise-grade Security and

Data Center Standards

Equipped with the Lantronix Evolution OS

™

networking operating system,

IntelliBox delivers enterprise-grade level networking security with built-in

SSH/SSL support. The hardened OS and mature protocol stack are

resilient to denial of service (DoS) and port mapping attacks and prevent

it from being used to bring down other networked devices. Evolution OS

uses familiar data-center standards such as a Cisco-like command line

interface (CLI) very similar to that used by routers and hubs, simplifying

configuration and enterprise network integration. It also incorporates

XML – a standard tool for web services, data transfer and rich content

management that encapsulates

data into a text-based format.

Powerful and Rugged

IntelliBox is equipped with isolated serial, I/O and Ethernet ports and

screw terminal connectors for serial, I/O, relay and power. It supports

Modbus TCP, Modbus ASCII and Modbus RTU and is FM-approved for

hazardous locations Class 1, Div. 2. IntelliBox also features 15KV serial

port ESD protection which protects the IntelliBox from electrical

overstress; ESD-protected I/O channels (independent and optically

isolated); wide -40°–75°C operational temperature range; and flexible

power with 9-30 VDC and 9-24 VAC input range.

IntelliBox can act as a Modbus TCP slave, enabling Modbus TCP

masters to monitor the status of digital inputs and set the digital

outputs and relays. It can also be used as a “Modbus bridge”

(Modbus TCP to Modbus RTU/ASCII protocol converter) enabling

users to connect RS232/RS485 Modbus RTU/ASCII devices to

their Ethernet network to be controlled by Modbus TCP

masters (PLCs, OPC servers, SCADA software, etc).

IntelliBox 2100 Device Server

Reduce service calls or trips to repair or check on equipment

IntelliBox does it for you!

Save time,reduce costs and increase efficiency

Network-enables equipment for Internet access

Proactively monitors serial and Ethernet devices

Takes automatic action and/or troubleshooting

Automatically reporting with email or RSS

Fully Automate Your Remote Equipment with

Real-time Event Management and Reporting

Device Server IntelliBox-I/O 2100

IntelliBox

-I/O 2100 is a breakthrough in truly automated control of

remote equipment. Powered by Lantronix EventTrak

™

technology,

this highly-advanced, programmable device server connects your

equipment to an IP network and monitors it to watch for events at

specified intervals. When an event occurs, IntelliBox automatically

sends pre-determined, user-defined command(s) to the equipment

causing it to take appropriate and/or corrective actions – without

any user intervention. IntelliBox can send email notification that

the event was detected and handled accordingly.

1 2

Summary of Contents

Page 1 - IntelliBox 2100 Device Server

True Autonomous Control with EventTrakIntelliBox proactively monitors and controls remote digital I/O, drycontact (relay) and RS232/422/485-based equi

Page 2 - Sample Application

Device Server IntelliBox-I/O 210015353 Barranca Parkway | Irvine | CA 92618 | USA | Tel: 800.422.7055 | Fax: 949.450.7232 | www.lantron

Comments to this Manuals

No comments

Lantronix IBIO21002-01 Datasheet

Browse online or download Datasheet for Serial servers Lantronix IBIO21002-01. Lantronix IntelliBox-I/O 2100 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Serial servers Lantronix IBIO21002-01